The OWO Skin must be used in direct contact with the skin and it should be tight-fitting. Follow the instructions carefully to ensure the correct adjustment of the OWO Skin.

2.1. Open all the zippers

2.2. Remove the plastic gel protectors. Keep the plastic gel protectors and put them back on once you’re done.

2.3. Put over bare skin

2.4. Close the zippers

Check that you have taken off all the plastic covers from the gel pads and ensure that the gel pads are in direct contact with your skin. You must place them on the designated areas without any obstructions. Please ensure there are no barriers, such as body hair, interfering with the electrodes’ contact with the skin. Particularly in the case of males, body hair may disrupt the electrodes’ contact with the skin and subsequently impact their proper functioning. You can find detailed instructions in our User Manual.

Make sure none of the gel pads have stuck to each other, and all of them are placed on the designated areas:

• Pectorals
• Abdominals
• Biceps
• Dorsals
• Lumbars

If some of them are misplaced, please disconnect the device before readjusting them.

2.5. Place the device in the side pocket

2.6. Connect the device to the OWO Skin

2.7. Turn the device on

2.8. You’re ready to go!